+86-571-88550927

Kontaktiraj nas

  • Tvornica: Br.90 Xinxin Rd, Fengdu Industrial Zona, Hangzhou, Kina.311115.
  • Ured: RM 707, 3 # haloplaza, Liangzhu, Yuhang Dist, Hangzhou, Kina.
  • Jeffkf1502@163.com
  • Tel: +86-0571-88550927

  • Fax: +86-0571- 88550920

  • Wechat \/ WhatsApp: + 86 18758159121

Govoreći o primjeni manometra

Apr 09, 2022

uvod

Pritisak je jedan od važnih parametara procesa u industrijskoj proizvodnji. Ako pritisak ne zadovoljava zahtjeve, to ne samo da će utjecati na efikasnost proizvodnje, smanjiti kvalitetu proizvoda, već će čak uzrokovati ozbiljne sigurnosne nesreće. Dakle, mjerenje tlaka ima poseban status u industrijskoj proizvodnji. Ovaj članak predstavlja odabir, instalaciju i kalibraciju manometara.

Prvo, izbor manometra

Pravilan odabir tipa instrumenta prema zahtjevima procesa proizvoda važan je preduvjet za osiguranje normalnog rada instrumenta i sigurne proizvodnje. Generalno, sljedeća tri zahtjeva treba uzeti u obzir pri odabiru tipa instrumenta: (1) Odaberite u skladu sa zahtjevima procesa proizvoda u industrijskoj proizvodnji. Na primjer, da li je potreban daljinski prijenos, automatsko snimanje ili alarm; (2) Prema fizičkim i hemijskim svojstvima mjerene sredine. Kao što su korozivnost, temperatura, viskozitet, stepen kontaminacije, zapaljiva i eksplozivna svojstva, itd., da li treba postaviti posebne zahtjeve za mjerni instrument koji treba izabrati; (3) Prema-uslovima okoline na lokaciji. Kao što su visoka temperatura, elektromagnetno polje, vibracije i-uslovi ugradnje na licu mjesta, itd., da li postoje posebni zahtjevi za vrstu instrumenta, itd.

1. Određivanje mjernog opsega instrumenta

Da bi se instrument koristio razumno i ekonomično, domet instrumenta ne može biti prevelik, ali da bi se osigurala tačnost mjerenja, minimalna vrijednost izmjerenog tlaka općenito nije manja od 1/3 pune skale instrument. Elastični element je dugotrajno deformiran zbog prevelikog naprezanja. Gornja granica manometra treba da bude viša od maksimalne vrednosti koja se meri (1/21/3 opsega), a margina treba da bude rezervisana.

2. Izbor tačnosti instrumenta

The accuracy of the instrument is determined according to the maximum measurement error allowed in the production process. It cannot be considered that the higher the accuracy of the instrument, the better. On the premise of meeting the process requirements, the instrument with lower precision, low price and durability should be selected as much as possible. Example of instrument type selection: The outlet pressure range of a compressor is 25~28MPa, and the absolute measurement error should not be greater than 1MPa. The process requires on-site observation and high and low limit alarms. Try to choose a pressure gauge correctly, and point out the model, accuracy and measurement range. The required conditions are: the measured pulsating pressure is 25~28MPa, and the absolute measurement error is less than or equal to 1MPa. Observation, high and low limit alarm. When selecting the instrument, consider that the pulsating pressure has a great influence on the life of the instrument, so the upper limit of the instrument selected is: P1=Pmax*2=28*2=56MPa. If the measurement range of the pressure gauge is 0~60MPa, then: 25MPa/60MPa>1/3, minimalna vrijednost izmjerenog pritiska nije manja od 1/3 pune skale, a donja granična vrijednost također ispunjava zahtjeve. Osim toga, prema zahtjevima greške mjerenja može se izračunati da su zahtjevi za dozvoljenu grešku instrumenta: 1/60100 posto =1.67 posto, tako da instrument sa nivoom tačnosti od 1,5 može ispuniti zahtjeve za greške.


2nd. Ugradnja manometra

Whether the pressure gauge is installed correctly or not directly affects the accuracy of the measurement results and the service life of the pressure gauge. The key to the installation of the pressure gauge is the selection of the pressure measuring point: (1) The pressure measuring point should be selected where the measured medium flows in a straight line. For the pipe segment, do not select it at the bend, bifurcation or dead end of the pipeline. (2) When measuring the liquid pressure, the pressure point should be perpendicular to the flow direction, the inner end face of the pressure pipe should be flush with the inner wall of the equipment, and there should be no protrusions or burrs. (3) When measuring the liquid pressure, the pressure-taking point should be at the lower part of the pipeline, so that no gas is accumulated in the pressure-guiding pipe; when measuring the gas pressure, the pressure-taking point should be above the pipe, so that no liquid is accumulated in the pressure-guiding pipe. (4) A shut-off  


3. Verifikacija i kalibracija instrumenata za detekciju pritiska (diferencijalnog pritiska).

Prije nego što se instrument može koristiti, mora se provjeriti i kalibrirati. Instrumente koji se koriste duže vrijeme također treba redovno provjeravati, a ciklus odrediti prema učestalosti upotrebe i stepenu naglaska. Kada instrument ima-prenosni sistem na velike udaljenosti i sekundarni instrument, treba ga verificirati i kalibrirati zajedno sa sekundarnim instrumentom. Metoda kalibracije manometra je: za kalibraciju koristite standardni manometar.


Pošaljite upit